It’s easy to plug in a washing machine or dishwasher. This article shows you how to do it quickly and without flooding your kitchen. Modern washers require both a hot and cold water supply san diego plumbing online site. However, most machines can work well with a cold water supply. The washing machine heats the water and supplies hot water to your home. Dishwashers operate on cold water and are similar.
Your machine’s waste is pushed into your sink outlet pipes, which are connected near the hot/cold water supply pipes. As all sinks are equipped with outlet pipes, it’s a smart idea to place your washer near your sink. You will need power to run your dishwasher and washing machine so make sure they are plugged in close to a 13-amp power source. The machine plumbing, power, and outlet sources are all connected in modern utility rooms. However, please verify before you begin work. Let’s get to work on your washing machine plumbing. The first thing you need to do is to turn off the water supply for the machine.
A red and blue T-piece or cut of the valve will be found on water pipes. Blue is for cold water, and red for hot. A hose, or an on-off water valve handle, will turn the cold water on/off. Turn this off before you unplug your old machine. To insert the valve to water, cut a section from the copper pipe measuring 18mm in length. You can use a cheap pipe splice cutter tool for this purpose. Simply put the blade inside the pipe and turn it. This will allow the tool to cut without the need for any special skills.